Skip to content

Optional Configuration Settings

This document describes Nautobot-specific configuration settings that may be customized in your nautobot_config.py, or, in many cases, by configuration of appropriate environment variables. It also describes a number of common Django configuration settings that may also be customized similarly.

The official Django documentation documents all Django settings, and this document does not attempt to replace that documentation.

Administratively Configurable Settings

Added in version 1.2.0

A number of settings can alternatively be configured via the Nautobot Admin UI. To do so, these settings must not be defined in your nautobot_config.py, as any settings defined there will take precedence over any values defined in the Admin UI. Settings that are currently configurable via the Admin UI include:

Settings configurable in nautobot_config.py

Extra Applications

A need may arise to allow the user to register additional settings. These will automatically apply based on keynames prefixed with EXTRA_ assuming the base key (the latter part of the setting name) is of type list or tuple.

For example, to register additional INSTALLED_APPS, you would simply specify this in your custom (user) configuration::

EXTRA_INSTALLED_APPS = [
    'foo.bar',
]

This will ensure your default setting's INSTALLED_APPS do not have to be modified, and the user can specify additional apps with ease. Similarly, additional MIDDLEWARE can be added using EXTRA_MIDDLEWARE.


ADMINS

Default: []

Administrators' names and emails as a list of (name, email) tuples. Nautobot will email details about critical errors to any administrators listed here.

For example:

ADMINS = [
    ['Hank Hill', 'hhill@example.com'],
    ['Dale Gribble', 'dgribble@example.com'],
]

See Also:


ALLOW_REQUEST_PROFILING

Added in version 2.2.0

Default: False

Environment Variable: NAUTOBOT_ALLOW_REQUEST_PROFILING

Global setting to allow or deny users from enabling request profiling on their login session.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.

See Also:


ALLOWED_URL_SCHEMES

Default: ['file', 'ftp', 'ftps', 'http', 'https', 'irc', 'mailto', 'sftp', 'ssh', 'tel', 'telnet', 'tftp', 'vnc', 'xmpp']

A list of permitted URL schemes referenced when rendering links within Nautobot. Note that only the schemes specified in this list will be accepted; if adding your own, be sure to replicate all of the default values as well (excluding those schemes which are not desirable).


AUTHENTICATION_BACKENDS

Default: ['nautobot.core.authentication.ObjectPermissionBackend']

A list of authentication backend classes (as strings) to use when attempting to authenticate a user. The entry "nautobot.core.authentication.ObjectPermissionBackend" must always be the last in this list.

See Also:


Default: ""

Environment Variable: NAUTOBOT_BANNER_BOTTOM

Custom content to be displayed in a banner at the bottom of all Nautobot pages.

Changed in version 2.2.4

Markdown formatting is supported within this message, as well as a limited subset of HTML.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.


Default: ""

Environment Variable: NAUTOBOT_BANNER_LOGIN

Custom content to be displayed in a banner on the login page above the login form.

Changed in version 2.2.4

Markdown formatting is supported within this message, as well as a limited subset of HTML.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.


Default: ""

Environment Variable: NAUTOBOT_BANNER_TOP

Custom content to be displayed in a banner at the top of all Nautobot pages.

Changed in version 2.2.4

Markdown formatting is supported within this message, as well as a limited subset of HTML.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.


BRANDING_FILEPATHS

Added in version 1.2.0

Default:

{'css': None,
 'favicon': None,
 'header_bullet': None,
 'icon_16': None,
 'icon_180': None,
 'icon_192': None,
 'icon_32': None,
 'icon_mask': None,
 'javascript': None,
 'logo': None,
 'nav_bullet': None}

Environment Variables:

  • NAUTOBOT_BRANDING_FILEPATHS_CSS

  • NAUTOBOT_BRANDING_FILEPATHS_FAVICON

  • NAUTOBOT_BRANDING_FILEPATHS_HEADER_BULLET

  • NAUTOBOT_BRANDING_FILEPATHS_ICON_16

  • NAUTOBOT_BRANDING_FILEPATHS_ICON_180

  • NAUTOBOT_BRANDING_FILEPATHS_ICON_192

  • NAUTOBOT_BRANDING_FILEPATHS_ICON_32

  • NAUTOBOT_BRANDING_FILEPATHS_ICON_MASK

  • NAUTOBOT_BRANDING_FILEPATHS_JAVASCRIPT

  • NAUTOBOT_BRANDING_FILEPATHS_LOGO

  • NAUTOBOT_BRANDING_FILEPATHS_NAV_BULLET

A set of filepaths relative to the MEDIA_ROOT which locate assets used for custom branding of your Nautobot instance. With the exception of css and javascript, which provide the option to add an additional file to Nautobot page content, each of the other assets takes the place of the corresponding stock Nautobot asset. This allows for, for instance, providing your own navbar logo and favicon. If a custom asset is not provided for any of the above options, the stock Nautobot asset is used.

Added in version 2.1.0

The header_bullet and nav_bullet assets were added as options.

Added in version 2.2.4

The css and javascript assets were added as options.


BRANDING_PREPENDED_FILENAME

Added in version 1.3.4

Default: "nautobot_"

Environment Variable: NAUTOBOT_BRANDING_PREPENDED_FILENAME

Defines the prefix of the filename when exporting to CSV/YAML or export templates.


BRANDING_TITLE

Added in version 1.2.0

Default: "Nautobot"

Environment Variable: NAUTOBOT_BRANDING_TITLE

Defines the custom branding title that should be used in place of 'Nautobot' within user facing areas of the application, such as the HTML title of web pages.


BRANDING_URLS

Added in version 1.2.0

Default:

{'code': 'https://github.com/nautobot/nautobot',
 'docs': None,
 'help': 'https://github.com/nautobot/nautobot/wiki'}

Environment Variables:

  • NAUTOBOT_BRANDING_URLS_CODE

  • NAUTOBOT_BRANDING_URLS_DOCS

  • NAUTOBOT_BRANDING_URLS_HELP

A set of URLs that correspond to helpful links in the right of the footer on every web page. If a custom URL is not provided for any of the links, the default link within the Nautobot community is used.


CELERY_BEAT_HEARTBEAT_FILE

Default: "/tmp/nautobot_celery_beat_heartbeat"

Environment Variable: NAUTOBOT_CELERY_BEAT_HEARTBEAT_FILE

A file touched by Celery Beat during health check.


CELERY_BROKER_TRANSPORT_OPTIONS

Default: {}

A dict of additional options passed to the Celery broker transport.

This is only required when configuring Celery to utilize Redis Sentinel.


CELERY_BROKER_URL

Default: "redis://localhost:6379/0"

Environment Variable: NAUTOBOT_CELERY_BROKER_URL

Celery broker URL used to tell workers where queues are located.


CELERY_BROKER_USE_SSL

Default: None

Optional configuration for Celery to use custom SSL certificates to connect to Redis.

See Also:


CELERY_REDIS_BACKEND_USE_SSL

Default: False

Optional configuration for Celery to use custom SSL certificates to connect to Redis.

See Also:


CELERY_TASK_DEFAULT_QUEUE

Added in version 1.5.0

Default: "default"

Environment Variable: NAUTOBOT_CELERY_TASK_DEFAULT_QUEUE

The default celery queue name that will be used by workers if no queue is specified in the nautobot-server celery worker command. This queue will also be used by celery tasks if no queue is specified when a task is run.


CELERY_TASK_SOFT_TIME_LIMIT

Default: 300

Environment Variable: NAUTOBOT_CELERY_TASK_SOFT_TIME_LIMIT

The global Celery task soft timeout (in seconds).

Any background task that exceeds this duration will receive a SoftTimeLimitExceeded exception and is responsible for handling this exception and performing any necessary cleanup or final operations before ending.

See Also:


CELERY_TASK_TIME_LIMIT

Default: 600

Environment Variable: NAUTOBOT_CELERY_TASK_TIME_LIMIT

The global Celery task hard timeout (in seconds).

Any background task that exceeds this duration will be forcibly killed with a SIGKILL signal.

See Also:


CELERY_WORKER_PROMETHEUS_PORTS

Added in version 1.5.10

Default: []

Environment Variable: NAUTOBOT_CELERY_WORKER_PROMETHEUS_PORTS

Ports for Prometheus metric HTTP server running on the celery worker(s).

Normally this should be set to a single port, unless you have multiple workers running on a single machine, i.e. sharing the same available ports. In that case you need to specify a range of ports greater than or equal to the highest amount of workers you are running on a single machine (comma-separated, like "8080,8081,8082"). You can then use the target_limit parameter to the Prometheus scrape_config to ensure you are not getting duplicate metrics in that case. Set this to an empty list to disable it.


CELERY_WORKER_REDIRECT_STDOUTS

Added in version 2.0.0

Default: True

Environment Variable: NAUTOBOT_CELERY_WORKER_REDIRECT_STDOUTS

If enabled stdout and stderr of running jobs will be redirected to the task logger.


CELERY_WORKER_REDIRECT_STDOUTS_LEVEL

Added in version 2.0.0

Default: "WARNING"

Permitted Values:

  • 'DEBUG'

  • 'INFO'

  • 'WARNING'

  • 'ERROR'

  • 'CRITICAL'

Environment Variable: NAUTOBOT_CELERY_WORKER_REDIRECT_STDOUTS_LEVEL

The log level of log messages generated by redirected job stdout and stderr.


CHANGELOG_RETENTION

Default: 90

Environment Variable: NAUTOBOT_CHANGELOG_RETENTION

The number of days to retain logged changes (object creations, updates, and deletions). Set this to 0 to retain changes in the database indefinitely.

Warning

If enabling indefinite changelog retention, it is recommended to periodically delete old entries. Otherwise, the database may eventually exceed capacity.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.


CONFIG_CONTEXT_DYNAMIC_GROUPS_ENABLED

Default: False

Environment Variable: NAUTOBOT_CONFIG_CONTEXT_DYNAMIC_GROUPS_ENABLED

If True, it will be possible to apply Config Context objects to Devices and Virtual Machines via Dynamic Group membership. When set to False this behavior will not be available.

Warning

With a large number of dynamic groups, enabling this could invoke a performance penalty when processing Config Contexts.


CONTENT_TYPE_CACHE_TIMEOUT

Added in version 1.6.0

Default: 0

Environment Variable: NAUTOBOT_CONTENT_TYPE_CACHE_TIMEOUT

The number of seconds to cache the content type accessible via a object's class property Object._content_type_cached. This can save frequent calls to ContentType.objects.get_for_model(model). Set this to 0 to disable caching.


CORS_ALLOW_ALL_ORIGINS

Default: False

Environment Variable: NAUTOBOT_CORS_ALLOW_ALL_ORIGINS

If True, all origins will be allowed. Other settings restricting allowed origins will be ignored.

Setting this to True can be dangerous, as it allows any website to make cross-origin requests to yours. Generally you'll want to restrict the list of allowed origins with CORS_ALLOWED_ORIGINS or CORS_ALLOWED_ORIGIN_REGEXES.


CORS_ALLOWED_ORIGIN_REGEXES

Default: []

A list of strings representing regexes that match Origins that are authorized to make cross-site HTTP requests.

Useful when CORS_ALLOWED_ORIGINS is impractical, such as when you have a large number of subdomains.

Example:

CORS_ALLOWED_ORIGIN_REGEXES = [r"^https://\w+\.example\.com$"]

CORS_ALLOWED_ORIGINS

Default: []

A list of origins that are authorized to make cross-site HTTP requests.

An Origin is defined by the CORS RFC Section 3.2 as a URI scheme + hostname + port, or one of the special values 'null' or 'file://'. Default ports (HTTPS = 443, HTTP = 80) are optional here.

The special value null is sent by the browser in "privacy-sensitive contexts", such as when the client is running from a file:// domain. The special value file:// is sent accidentally by some versions of Chrome on Android as per this bug.

Example:

CORS_ALLOWED_ORIGINS = [
    'https://example.com',
    'https://sub.example.com',
    'http://localhost:8080',
    'http://127.0.0.1:9000'
]

CSRF_TRUSTED_ORIGINS

Default: []

A list of hosts (fully-qualified domain names (FQDNs) or subdomains) that are considered trusted origins for cross-site secure requests such as HTTPS POST.

See Also:


DATABASE_ROUTERS

Default: []

Custom database router to generate the before & after queries for generating diffs. Used for Nautobot Version Control App.


DATE_FORMAT

Default: "N j, Y"

Environment Variable: NAUTOBOT_DATE_FORMAT

Custom format for dates. The default results in strings like "January 22, 2024".

See Also:


DATETIME_FORMAT

Default: "N j, Y g:i a"

Environment Variable: NAUTOBOT_DATETIME_FORMAT

Custom format for date-times. The default results in strings like "January 22, 2024 1:22 p.m.".

See Also:


DEBUG

Default: False

Environment Variable: NAUTOBOT_DEBUG

This setting enables debugging. Debugging should be enabled only during development or troubleshooting.

Note that only clients which access Nautobot from a recognized internal IP address will see debugging tools in the user interface.

Warning

Never enable debugging on a production system, as it can expose sensitive data to unauthenticated users and imposes a substantial performance penalty.

See Also:


DEPLOYMENT_ID

Added in version 1.6.0

Default: ""

Environment Variable: NAUTOBOT_DEPLOYMENT_ID

Setting to uniquely but anonymously identify Nautobot deployments when sending installation metrics.

Defaults to a random UUID generated at installation time.

This setting is used to uniquely but anonymously identify Nautobot deployments when sending installation metrics. This setting is not generally intended to be user-serviceable.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.

See Also:


DEVICE_NAME_AS_NATURAL_KEY

Added in version 2.0.0

Default: False

Environment Variable: NAUTOBOT_DEVICE_NAME_AS_NATURAL_KEY

Device names are not guaranteed globally-unique by Nautobot but in practice they often are. Set this to True to use the device name alone as the natural key for Device objects. Set this to False to use the sequence (name, tenant, location) as the natural key instead.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.


DYNAMIC_GROUPS_MEMBER_CACHE_TIMEOUT

Added in version 1.6.0

Default: 0

Environment Variable: NAUTOBOT_DYNAMIC_GROUPS_MEMBER_CACHE_TIMEOUT

The number of seconds to cache the member list of dynamic groups. Set this to 0 to disable caching.

With large datasets (those in scope of a Dynamic Group and number of Dynamic Groups themselves), users will encounter a performance penalty using or accessing the membership lists. This setting allows users to accept a cached list for common use cases (particularly in the UI) that expires after the configured time."

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.


EXEMPT_VIEW_PERMISSIONS

Default: []

A list of Nautobot models to exempt from the enforcement of view permissions.

Models listed here will be viewable by all users, both authenticated and anonymous. List models in the form <app>.<model>.

Example:

EXEMPT_VIEW_PERMISSIONS = [
    'dcim.location',
    'dcim.location_type',
    'ipam.prefix',
]

To exempt all models from view permission enforcement, set the following. (Note that EXEMPT_VIEW_PERMISSIONS must be an iterable.)

EXEMPT_VIEW_PERMISSIONS = ['*']

Note

Using a wildcard will not affect certain potentially sensitive models, such as user permissions. If there is a need to exempt these models, they must be specified individually.


EXTERNAL_AUTH_DEFAULT_GROUPS

Default: []

The list of group names to assign a new user account when created using 3rd-party authentication.


EXTERNAL_AUTH_DEFAULT_PERMISSIONS

Default: {}

A mapping of permissions to assign a new user account when created using SSO authentication.

Each key in the dictionary will be the permission name specified as <app_label>.<action>_<model>, and the value should be set to the permission constraints, or None to allow all objects.

Example:

Permission Description
{'dcim.view_device': {}} or {'dcim.view_device': None} Users can view all devices
{'dcim.add_device': {}} Users can add devices, see note below
{'dcim.view_device': {'location__name__in': ['HQ'], 'location__location_type__name__in': ['Building']}} Users can view all devices in the HQ Building

Warning

Permissions can be complicated! Be careful when restricting permissions to also add any required prerequisite permissions.

For example, when adding Devices the Role, Device Type, Location, and Status fields are all required fields in order for the UI to function properly. Users will also need view permissions for those models or the corresponding field selections in the UI will be unavailable and potentially prevent objects from being able to be created or edited.

The following example gives a user a reasonable amount of access to add devices to a single location (Building HQ in this case):

{
    'dcim.add_device': {'location__name__in':  ['HQ'], 'location__location_type__name__in': ['Building']},
    'dcim.view_device': {'location__name__in':  ['HQ'], 'location__location_type__name__in': ['Building']},
    'dcim.view_devicetype': None,
    'extras.view_role': None,
    'extras.view_status': None,
    'dcim.view_location': {'name__in':  ['HQ'], 'location_type__name__in': ['Building']},
    'dcim.view_manufacturer': None,
    'dcim.view_region': None,
    'dcim.view_rack': None,
    'dcim.view_rackgroup': None,
    'dcim.view_platform': None,
    'virtualization.view_cluster': None,
    'virtualization.view_clustergroup': None,
    'tenancy.view_tenant': None,
    'tenancy.view_tenantgroup': None,
}

See Also:


FORCE_SCRIPT_NAME

Default: None

If not None, this will be used as the value of the SCRIPT_NAME environment variable in any HTTP request.

This setting can be used to override the server-provided value of SCRIPT_NAME, which is most commonly used for hosting Nautobot in a subdirectory (e.g. example.com/nautobot/).

Important

To host Nautobot under a subdirectory you must set this value to match the same prefix configured on your HTTP server. For example, if you configure NGINX to serve Nautobot at /nautobot/, you must set FORCE_SCRIPT_NAME = "/nautobot/".

See Also:


GIT_ROOT

Default: "~/.nautobot/git"

Environment Variable: NAUTOBOT_GIT_ROOT

The file path to a directory where cloned Git repositories will be located.


GRAPHQL_COMPUTED_FIELD_PREFIX

Default: "cpf"

The prefix used for all computed fields in GraphQL. e.g. my_field => cpf_my_field


GRAPHQL_CUSTOM_FIELD_PREFIX

Default: "cf"

The prefix used for all custom fields in GraphQL. e.g. my_field => cf_my_field


GRAPHQL_RELATIONSHIP_PREFIX

Default: "rel"

The prefix used for all relationship associations in GraphQL. e.g. my_relationship => rel_my_relationship.


HTTP_PROXIES

Default: None

A dictionary of HTTP proxies to use for outbound requests originating from Nautobot (such as when sending webhook requests).

Proxies should be specified by schema (HTTP and HTTPS) as per the Python requests library documentation.

Example:

HTTP_PROXIES = {
    'http': 'http://10.10.1.10:3128',
    'https': 'http://10.10.1.10:1080',
}

Note

When using Git repositories within Nautobot the Python library GitPython needs extra proxy configuration:

    git config --global http.proxy http://192.0.2.1:3128
    git config --global https.proxy http://192.0.2.1:3128

INSTALLATION_METRICS_ENABLED

Added in version 1.6.0

Default: True

Environment Variable: NAUTOBOT_INSTALLATION_METRICS_ENABLED

Controls sending of anonymized installation metrics to the Nautobot maintainers.

Default value is user-specified when running nautobot-server init for a new deployment. Defaults to True when upgrading pre-1.6.0 deployments without configuring a value. When set to True, Nautobot will send anonymized installation metrics to the Nautobot maintainers when running the post_upgrade or send_installation_metrics management commands.

See Also:


INTERNAL_IPS

Default: ['127.0.0.1', '::1']

A list of IP addresses recognized as internal to the system, used to control the display of debugging output.

For example, the Django debugging toolbar, if installed, will be viewable only when a client is accessing Nautobot from one of the listed IP addresses (and DEBUG is true).


JOB_CREATE_FILE_MAX_SIZE

Added in version 2.1.0

Default: 10485760

Environment Variable: NAUTOBOT_JOB_CREATE_FILE_MAX_SIZE

The maximum file size (in bytes) that a running Job will be allowed to create in a single call to Job.create_file().

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.

See Also:


JOB_FILE_IO_STORAGE

Added in version 2.1.0

Default: "db_file_storage.storage.DatabaseFileStorage"

Environment Variable: NAUTOBOT_JOB_FILE_IO_STORAGE

The backend storage engine for handling files provided as input to Jobs and files generated as output by Jobs.

Warning

For backwards compatibility with storage of Job inputs in prior versions of Nautobot, this currently defaults to using DatabaseFileStorage to store such files directly in Nautobot's database; however this is not typically the best option (see below) and may change in a future major release.

If your Nautobot server instance(s) and your Celery worker instance(s) share a common MEDIA_ROOT filesystem (as would typically be the case in a single-server installation of Nautobot) then we recommend changing this to "django.core.files.storage.FileSystemStorage" to store Job files on the filesystem (which will place them into a files/ subdirectory under MEDIA_ROOT) instead of in the database.

If your Nautobot server instance(s) and Celery worker instance(s) do not share a common filesystem, we recommend using one of the django-storages options such as S3 to provide a storage backend that can be accessed by the server(s) and worker(s) alike.

Tip

For an example of using django-storages with AWS S3 buckets, visit the django-storages with S3 user-guide.

If you have neither a common MEDIA_ROOT filesystem nor an appropriate remote storage option, then it's permissible to leave this at its default, but know that storing files in the database is provided here as a "least-worst" option only.

Caution

It's typically safe to change this setting when initially updating to Nautobot 2.1.0 or later, as there should be no pre-existing Job output files, although any existing scheduled Jobs that have file inputs may need to be deleted and recreated after doing so. However, once you've run any Jobs that output to a file, changing storage backends will of course break any existing links to Job output files in the previous storage backend. Migrating Job stored files from one backend to another is out of scope for this document.

See Also:


JOBS_ROOT

Default: "~/.nautobot/jobs"

Environment Variable: NAUTOBOT_JOBS_ROOT

The file path to a directory where Jobs can be discovered.

Changed in version 2.0.0

This directory no longer requires an __init__.py file.


LOCATION_NAME_AS_NATURAL_KEY

Added in version 2.0.0

Default: False

Environment Variable: NAUTOBOT_LOCATION_NAME_AS_NATURAL_KEY

Location names are not guaranteed globally-unique by Nautobot but in practice they often are. Set this to True to use the location name alone as the natural key for Location objects. Set this to False to use the sequence (name, parent__name, parent__parent__name, ...) as the natural key instead.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.


LOG_DEPRECATION_WARNINGS

Added in version 1.5.2

Default: False

Environment Variable: NAUTOBOT_LOG_DEPRECATION_WARNINGS

Set the environment variable NAUTOBOT_LOG_DEPRECATION_WARNINGS to change this setting. This can be set to True to allow deprecation warnings raised by Nautobot to (additionally) be logged as WARNING level log messages.

Warning

This setting cannot be effectively configured in nautobot_config.py due to the order of code evaluation at startup time. To enable this setting, always use the NAUTOBOT_LOG_DEPRECATION_WARNINGS environment variable.

Deprecation warnings are normally silent in Python, but can be enabled globally by various means such as setting the PYTHONWARNINGS environment variable. However, doing so can be rather noisy, as it will also include warnings from within Django about various code in various package dependencies of Nautobot's, etc.

This configuration setting allows a more targeted enablement of only warnings from within Nautobot itself, which can be useful when vetting various Nautobot Apps for future-proofness against upcoming changes to Nautobot.


LOGGING

Default:

{
    'version': 1,
    'disable_existing_loggers': False,
    'formatters': {
        'normal': {
            'datefmt': '%H:%M:%S',
            'format': '%(asctime)s.%(msecs)03d %(levelname)-7s %(name)s :\n  %(message)s',
        },
        'verbose': {
            'datefmt': '%H:%M:%S',
            'format': '%(asctime)s.%(msecs)03d %(levelname)-7s %(name)-20s %(filename)-15s '
                      '%(funcName)30s() :\n  %(message)s',
        },
    },
    'handlers': {
        'normal_console': {
            'class': 'logging.StreamHandler',
            'formatter': 'normal',
            'level': 'INFO',
        },
        'verbose_console': {
            'class': 'logging.StreamHandler',
            'formatter': 'verbose',
            'level': 'DEBUG',
        },
    },
    'loggers': {
        'django': {'handlers': ['normal_console'], 'level': 'INFO'},
        'nautobot': {'handlers': ['normal_console'], 'level': 'INFO'},
    },
}

A dictionary containing the configuration settings for logging in Nautobot.

The default translates to:

  • All messages from Django and from Nautobot of INFO severity or higher will be logged to the console.
  • If DEBUG is True, Nautobot DEBUG messages will also be logged, and all Nautobot messages will be logged with a more verbose format including the filename and function name that originated each log message.

The default log formatters split each log message across two lines of output for greater readability, which is useful for local observation and troubleshooting, but you may find it impractical to use in production environments that expect one line per log message. Fortunately, the Django framework allows for extensive customization of logging format and destination.

Below is an example configuration extension which will additionally write all INFO and higher messages to a local file:

LOGGING["handlers"]["file"] = {
    "level": "INFO",
    "class": "logging.FileHandler",
    "filename": "/var/log/nautobot.log",
    "formatter": "normal",
}
LOGGING["loggers"]["django"]["handlers"] += ["file"]
LOGGING["loggers"]["nautobot"]["handlers"] += ["file"]

Available Loggers

  • django.* - Generic Django operations (HTTP requests/responses, etc.)
  • nautobot.<app>.<module> - Generic form for model- or module-specific log messages
  • nautobot.auth.* - Authentication events
  • nautobot.extras.jobs.* - Job execution (* = JobClassName)
  • nautobot.core.graphql.* - GraphQL initialization and operation.
  • nautobot.extras.plugins.* - App loading and activity
  • nautobot.core.views.generic.* - Generic views which handle business logic for the web UI

See Also:


MAINTENANCE_MODE

Default: False

Environment Variable: NAUTOBOT_MAINTENANCE_MODE

Setting this to true causes Nautobot to go into maintenance mode.

Setting this to True will display a "maintenance mode" banner at the top of every page. Additionally, Nautobot will no longer update a user's "last active" time upon login. This is to allow new logins when the database is in a read-only state. Recording of login times will resume when maintenance mode is disabled.

Note

The default SESSION_ENGINE configuration will store sessions in the database, but this obviously will not work when MAINTENANCE_MODE is True and the database is in a read-only state for maintenance. Consider setting SESSION_ENGINE to django.contrib.sessions.backends.cache when enabling MAINTENANCE_MODE.

Note

The Docker container normally attempts to run migrations on startup; however, if the database is in a read-only state the Docker container will fail to start. Setting the environment variable NAUTOBOT_DOCKER_SKIP_INIT to true will prevent the migrations from occurring.

Note

If you are using django-auth-ldap for LDAP authentication, django-auth-ldap by default will try to update a user object on every log in. If the database is in a read-only state django-auth-ldap will fail. You will also need to set AUTH_LDAP_ALWAYS_UPDATE_USER=False and AUTH_LDAP_NO_NEW_USERS=True to avoid this.

See Also:


MAX_PAGE_SIZE

Default: 1000

Environment Variable: NAUTOBOT_MAX_PAGE_SIZE

A web user or API consumer can request an arbitrary number of objects by appending the limit parameter to the URL (e.g. ?limit=1000). This parameter defines the maximum acceptable limit. Setting this to 0 or None will allow a client to retrieve all matching objects at once with no limit by specifying ?limit=0.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.


MEDIA_ROOT

Default: "~/.nautobot/media"

The file path to the location where media files (such as image attachments) are stored.

See Also:


METRICS_AUTHENTICATED

Added in version 2.1.5

Default: False

Environment Variable: NAUTOBOT_METRICS_AUTHENTICATED

Toggle requiring authentication to view /metrics.

See Also:


METRICS_DISABLED_APPS

Added in version 2.2.1

Default: []

Environment Variable: NAUTOBOT_METRICS_DISABLED_APPS

A list of app names for which Prometheus metrics should be disabled. (If provided as an environment variable, it should be a comma-separated string, for example NAUTOBOT_METRICS_DISABLED_APPS="nautobot_ssot, nautobot_device_lifecycle_mgmt".)

See Also:


METRICS_ENABLED

Default: False

Environment Variable: NAUTOBOT_METRICS_ENABLED

Toggle the availability of Prometheus-compatible metrics at /metrics.

See Also:


NAPALM_ARGS

Default: {}

A dictionary of optional arguments to pass to NAPALM when instantiating a network driver.

Example:

NAPALM_ARGS = {
    'api_key': '472071a93b60a1bd1fafb401d9f8ef41',
    'port': 2222,
}

Some platforms (e.g. Cisco IOS) require an enable password to be passed in addition to the normal password. If desired, you can use the configured NAPALM_PASSWORD as the value for this argument:

NAPALM_USERNAME = 'username'
NAPALM_PASSWORD = 'MySecretPassword'
NAPALM_ARGS = {
    'secret': NAPALM_PASSWORD,          # ios and nxos_ssh
    'enable_password': NAPALM_PASSWORD, # eos
    # Include any additional args here
}

Note

If a given device has an appropriately populated secrets group assigned to it, a secret defined in that group can override the NAPALM_ARGS['secret'] or NAPALM_ARGS['enable_password'] default value defined here.

See Also:


NAPALM_PASSWORD

Default: ""

Environment Variable: NAUTOBOT_NAPALM_PASSWORD

Nautobot will use this optional credential with NAPALM_USERNAME when authenticating to remote devices via the NAPALM library, if installed.

Note

If SSH public key authentication has been set up on the remote device(s) for the system account under which Nautobot runs, this parameter is not needed.

Note

If a given device has an appropriately populated secrets group assigned to it, the secrets defined in that group will take precedence over these default values.


NAPALM_TIMEOUT

Default: 30

Environment Variable: NAUTOBOT_NAPALM_TIMEOUT

The amount of time (in seconds) to wait for NAPALM to connect to a device.


NAPALM_USERNAME

Default: ""

Environment Variable: NAUTOBOT_NAPALM_USERNAME

Nautobot will use this optional credential with NAPALM_PASSWORD when authenticating to remote devices via the NAPALM library, if installed.

Note

If SSH public key authentication has been set up on the remote device(s) for the system account under which Nautobot runs, this parameter is not needed.

Note

If a given device has an appropriately populated secrets group assigned to it, the secrets defined in that group will take precedence over these default values.


NAUTOBOT_ROOT

Default: "~/.nautobot/"

Environment Variable: NAUTOBOT_ROOT

The filesystem path to use to store Nautobot files (Jobs, uploaded images, Git repositories, etc.).

This setting is used internally in the core settings to provide default locations for features that require file storage, and the default location of the nautobot_config.py.

Warning

Do not override NAUTOBOT_ROOT in your nautobot_config.py. It will not work as expected. If you need to customize this setting, please always set the NAUTOBOT_ROOT environment variable.


NETWORK_DRIVERS

Added in version 1.6.0

Default: {}

An optional dictionary to extend or override the default Platform.network_driver translations provided by netutils.

For example, to add support for a custom Platform.network_driver value of "my_network_driver" for Netmiko and PyATS drivers:

NETWORK_DRIVERS = {
    'netmiko': {'my_network_driver': 'cisco_ios'},
    'pyats': {'my_network_driver': 'iosxe'},
}

The default top-level keys are ansible, hier_config, napalm, netmiko, netutils_parser, ntc_templates, pyats, pyntc, and scrapli, but you can also add additional keys if you have an alternative network driver that you want your Nautobot instance to include.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.


PAGINATE_COUNT

Default: 50

Environment Variable: NAUTOBOT_PAGINATE_COUNT

The default maximum number of objects to display per page within each list of objects. Applies to both the UI and the REST API.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.


PER_PAGE_DEFAULTS

Default: [25, 50, 100, 250, 500, 1000]

Environment Variable: NAUTOBOT_PER_PAGE_DEFAULTS

The options displayed in the web interface dropdown to limit the number of objects per page.

For proper user experience, this list should include the PAGINATE_COUNT and MAX_PAGE_SIZE values as options.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.


PLUGINS

Default: []

A list of installed Nautobot Apps to enable. Apps will not take effect unless they are listed here.

Warning

Apps extend Nautobot by allowing external code to run with the same access and privileges as Nautobot itself. Only install Apps from trusted sources. The Nautobot maintainers make absolutely no guarantees about the integrity or security of your installation with Apps enabled.


PLUGINS_CONFIG

Default: {}

This parameter holds configuration settings for individual Nautobot Apps.

It is defined as a dictionary, with each key using the name of an installed App. The specific parameters supported are unique to each App; reference the App's documentation to determine the supported parameters. An example configuration is shown below:

PLUGINS_CONFIG = {
    'app1': {
        'foo': 123,
        'bar': True
    },
    'app2': {
        'foo': 456,
    },
}

Note that an App must be listed in PLUGINS for its configuration to take effect.


PREFER_IPV4

Default: False

Environment Variable: NAUTOBOT_PREFER_IPV4

When determining the primary IP address for a device, IPv6 is preferred over IPv4 by default. Set this to True to prefer IPv4 instead.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.


RACK_ELEVATION_DEFAULT_UNIT_HEIGHT

Default: 22

Environment Variable: NAUTOBOT_RACK_ELEVATION_DEFAULT_UNIT_HEIGHT

Default height (in pixels) of a unit within a rendered rack elevation. For best results, this should be approximately one tenth of `RACK_ELEVATION_DEFAULT_UNIT_WIDTH.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.


RACK_ELEVATION_DEFAULT_UNIT_WIDTH

Default: 230

Environment Variable: NAUTOBOT_RACK_ELEVATION_DEFAULT_UNIT_WIDTH

Default width (in pixels) of a unit within a rendered rack elevation.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.


RACK_ELEVATION_UNIT_TWO_DIGIT_FORMAT

Added in version 2.2.1

Default: False

Environment Variable: NAUTOBOT_RACK_ELEVATION_UNIT_TWO_DIGIT_FORMAT

Enables two-digit format for the rack unit numbering in a rack elevation diagram.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.


REDIS_LOCK_TIMEOUT

Default: 600

Environment Variable: NAUTOBOT_REDIS_LOCK_TIMEOUT

Maximum duration of a Redis lock created when calling /api/ipam/prefixes/{id}/available-prefixes/ or /api/ipam/prefixes/{id}/available-ips/ to avoid inadvertently allocating the same prefix or IP to multiple simultaneous callers.

Default is set to 600 seconds (10 minutes) to be longer than any theoretical API call time. This is to prevent a deadlock scenario where the server did not gracefully exit the with block when acquiring the Redis lock.


RELEASE_CHECK_TIMEOUT

Default: 86400

Environment Variable: NAUTOBOT_RELEASE_CHECK_TIMEOUT

The number of seconds to retain the latest version that is fetched from the GitHub API before automatically invalidating it and fetching it from the API again.

Warning

This must be set to at least one hour (3600 seconds). Setting it to a value lower than this is an error.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.


RELEASE_CHECK_URL

Default: ""

Environment Variable: NAUTOBOT_RELEASE_CHECK_URL

This parameter defines the URL of the repository that will be checked periodically for new Nautobot releases. When a new release is detected, a message will be displayed to administrative users on the home page.

This can be set to the official repository ('https://api.github.com/repos/nautobot/nautobot/releases') or a custom fork. Set this to None to disable automatic update checks.

Note

The URL provided must be compatible with the GitHub REST API.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.


REMOTE_AUTH_AUTO_CREATE_USER

Default: False

If set to True, local accounts will be automatically created for users authenticated via a remote service.

See Also:


REMOTE_AUTH_HEADER

Default: "HTTP_REMOTE_USER"

When remote user authentication is in use, this is the name of the HTTP header which informs Nautobot of the currently authenticated user. For example, to use the request header X-Remote-User, it needs to be set to "HTTP_X_REMOTE_USER".

See Also:


SANITIZER_PATTERNS

Added in version 1.3.4

Default:

[
    (re.compile(r"(https?://)?\S+\s*@", re.IGNORECASE), r"\1{replacement}@"),
    (
        re.compile(r"(username|password|passwd|pwd|secret|secrets)([\"']?(?:\s+is.?|:)?\s+)\S+[\"']?", re.IGNORECASE),
        r"\1\2{replacement}",
    ),
]

List of (regular expression, replacement pattern) tuples used by the nautobot.core.utils.logging.sanitize() function.

As of Nautobot 1.3.4 this function is used primarily for sanitization of Job log entries, but it may be used in other scopes in the future.

This pattern catches patterns such as:

Pattern Match Examples
Password is1234
Password: is1234
Password is: is1234
Password is is1234
secret is: is1234
secret is is1234
secrets is: is1234
secrets is is1234
{"username": "is1234"}
{"password": "is1234"}
{"secret": "is1234"}
{"secrets": "is1234"}

Info

is1234 would be replaced in the Job logs with (redacted).


SESSION_CACHE_ALIAS

Default: "default"

The Alias for the sessions cache defined in CACHES, used in Nautobot Version Control App.


Default: 1209600

Environment Variable: NAUTOBOT_SESSION_COOKIE_AGE

The maximum age of session cookies, in seconds. The default value is 2 weeks.

See Also:


SESSION_ENGINE

Default: "django.contrib.sessions.backends.db"

Controls where Nautobot stores session data.

To use cache-based sessions, set this to 'django.contrib.sessions.backends.cache'. To use file-based sessions, set this to 'django.contrib.sessions.backends.file'.

See Also:


SESSION_EXPIRE_AT_BROWSER_CLOSE

Default: False

Environment Variable: NAUTOBOT_SESSION_EXPIRE_AT_BROWSER_CLOSE

If this is set to True, Nautobot will use browser-length cookies - cookies that expire as soon as the user closes their browser. When set to False, session cookies will be stored in users' browsers for as long as SESSION_COOKIE_AGE.

See Also:


SESSION_FILE_PATH

Default: None

Environment Variable: NAUTOBOT_SESSION_FILE_PATH

HTTP session data is used to track authenticated users when they access Nautobot. By default, Nautobot stores session data in its database. However, this inhibits authentication to a standby instance of Nautobot without write access to the database. Alternatively, a local file path may be specified here and Nautobot will store session data as files instead of using the database. Note that the Nautobot system user must have read and write permissions to this path. If set to the default value of None, Nautobot will use the standard temporary directory for the system.

If you set this value, you must also enable file-based sessions as explained under SESSION_ENGINE.


SHORT_DATE_FORMAT

Default: "Y-m-d"

Environment Variable: NAUTOBOT_SHORT_DATE_FORMAT

Custom short format for dates. The default results in strings like "2024-01-22".

See Also:


SHORT_DATETIME_FORMAT

Default: "Y-m-d H:i"

Environment Variable: NAUTOBOT_SHORT_DATETIME_FORMAT

Custom short format for date-times. The default results in strings like "2024-01-22 13:23".

See Also:


SOCIAL_AUTH_BACKEND_PREFIX

Default: "social_core.backends"

Configuration of a custom external authentication backend with python-social-auth.

See Also:


STATIC_ROOT

Default: "~/.nautobot/static"

The location where static files (such as CSS, JavaScript, fonts, or images) used to serve the web interface will be staged by the nautobot-server collectstatic command.

See Also:


STORAGE_BACKEND

Default: None

The backend storage engine for handling uploaded files (e.g. image attachments).

Nautobot supports integration with the django-storages package, which provides backends for several popular file storage services. If not configured, local filesystem storage will be used.

Tip

For an example of using django-storages with AWS S3 buckets, visit the django-storages with S3 user-guide.

The configuration parameters for the specified storage backend are defined under the STORAGE_CONFIG setting.

See Also:


STORAGE_CONFIG

Default: {}

A dictionary of configuration parameters for the storage backend configured as STORAGE_BACKEND.

The specific parameters to be used here are specific to each backend.

If STORAGE_BACKEND is not defined, this setting will be ignored.

See Also:


STRICT_FILTERING

Added in version 1.4.0

Default: True

Environment Variable: NAUTOBOT_STRICT_FILTERING

If set to True (default), UI and REST API filtering of object lists will fail if an unknown/unrecognized filter parameter is provided as a URL parameter. (For example, /dcim/devices/?ice_cream_flavor=chocolate or /api/dcim/locations/?ice_cream_flavor=chocolate)

UI list (table) views will report an error message in this case and display no filtered objects; REST API list endpoints will return a 400 Bad Request response with an explanatory error message.

If set to False, unknown/unrecognized filter parameters will be discarded and ignored, although Nautobot will log a warning message.

Warning

Setting this to False can result in unexpected filtering results in the case of user error, for example /dcim/devices/?has_primry_ip=false (note the typo primry) will result in a list of all devices, rather than the intended list of only devices that lack a primary IP address. In the case of Jobs or external automation making use of such a filter, this could have wide-ranging consequences.


SUPPORT_MESSAGE

Added in version 2.0.2

Default: ""

Environment Variable: NAUTOBOT_SUPPORT_MESSAGE

A message to include on error pages (status code 403, 404, 500, etc.) when an error occurs.

You can configure this to direct users to the appropriate contact(s) within your organization that provide support for Nautobot. Markdown formatting is supported within this message, as well as a limited subset of HTML.

If unset, the default message that will appear is If further assistance is required, please join the #nautobot channel on [Network to Code's Slack community](https://slack.networktocode.com) and post your question.

Tip

If you do not set a value for this setting in your nautobot_config.py, it can be configured dynamically by an admin user via the Nautobot Admin UI. If you do have a value for this setting in nautobot_config.py, it will override any dynamically configured value.


TEST_FACTORY_SEED

Added in version 1.5.0

Default: None

Environment Variable: NAUTOBOT_TEST_FACTORY_SEED

This configuration provides a fixed seed string for the pseudo-random generator used to populate test data into the database, providing for reproducible randomness across consecutive test runs. If unset, a random seed will be used each time.

See Also:


TEST_PERFORMANCE_BASELINE_FILE

Added in version 1.5.0

Default: "nautobot/core/tests/performance_baselines.yml"

Environment Variable: NAUTOBOT_TEST_PERFORMANCE_BASELINE_FILE

File path of a YAML file providing baseline times for all performance-related tests.

The YAML file should conform to the following format:

tests:
    - name: >-
          test_run_job_with_sensitive_variables_and_requires_approval
          (nautobot.extras.tests.test_views.JobTestCase)
      execution_time: 4.799533
    - name: test_run_missing_schedule (nautobot.extras.tests.test_views.JobTestCase)
      execution_time: 4.367563
    - name: test_run_now_missing_args (nautobot.extras.tests.test_views.JobTestCase)
      execution_time: 4.363194
    - name: >-
          test_create_object_with_constrained_permission
          (nautobot.extras.tests.test_views.GraphQLQueriesTestCase)
      execution_time: 3.474244
    - name: >-
          test_run_now_constrained_permissions
          (nautobot.extras.tests.test_views.JobTestCase)
      execution_time: 2.727531

TEST_USE_FACTORIES

Added in version 1.5.0

Default: False

Environment Variable: NAUTOBOT_TEST_USE_FACTORIES

If set to True, the Nautobot test runner will call nautobot-server generate_test_data ... before executing any test cases, pre-populating the test database with various pseudo-random instances of many of Nautobot's data models.

Warning

This functionality requires the installation of the factory-boy Python package, which is present in Nautobot's own development environment, but is not an inherent dependency of the Nautobot package when installed otherwise, such as into an App's development environment.

Info

Setting this to True is a requirement for all Nautobot core tests as of 1.5.0, and it is set accordingly in nautobot/core/tests/nautobot_config.py, but defaults to False otherwise so as to remain backwards-compatible with Apps that also may use the Nautobot test runner in their own test environments, but have not yet updated their tests to account for the presence of this test data.

Because this test data can obviate the need to manually construct complex test data, and the random factor can improve test robustness, App developers are encouraged to set this to True in their configuration, ensure that their development environments include the factory-boy Python package as a test dependency, and update their tests as needed.

See Also:


TIME_FORMAT

Default: "g:i a"

Environment Variable: NAUTOBOT_TIME_FORMAT

Custom format for times. The default results in strings like "1:23 p.m.".

See Also:


TIME_ZONE

Default: "UTC"

Environment Variable: NAUTOBOT_TIME_ZONE

The time zone Nautobot will use when dealing with dates and times. It is recommended to use UTC time unless you have a specific need to use a local time zone. Please see the list of available time zones.

Warning

Scheduled jobs will run in the time zone configured in this setting. If you change this setting from the default UTC, you must change it on the Celery Beat server and all Nautobot web servers or your scheduled jobs may run in the wrong time zone.

See Also:


UI_RACK_VIEW_TRUNCATE_FUNCTION

Added in version 1.4.0

Default:

def UI_RACK_VIEW_TRUNCATE_FUNCTION(device_display_name):
    return str(device_display_name).split(".")[0]

This setting function is used to perform the rack elevation truncation feature.

This provides a way to tailor the truncation behavior to best suit the needs of the installation. The function must take only one argument: the device display name, as a string, attempting to be rendered on the rack elevation. The function must return only one argument: a string of the truncated device display name.

Environment-Variable-Only Settings

Warning

The following settings are only configurable as environment variables, and not via nautobot_config.py or similar.


GIT_SSL_NO_VERIFY

Default: Unset

If you are using a self-signed git repository, you will need to set the environment variable GIT_SSL_NO_VERIFY="1" in order for the repository to sync.

Warning

This must be specified as an environment variable. Setting it in nautobot_config.py will not have the desired effect.


NAUTOBOT_LOG_DEPRECATION_WARNINGS

Added in version 1.5.2
Changed in version 1.5.3

This was previously available as a config file setting but changed to environment-variable only. Also DEBUG = True will no longer work to log deprecation warnings.

Default: False

This can be set to True to allow deprecation warnings raised by Nautobot to (additionally) be logged as WARNING level log messages. (Deprecation warnings are normally silent in Python, but can be enabled globally by various means such as setting the PYTHONWARNINGS environment variable. However, doing so can be rather noisy, as it will also include warnings from within Django about various code in various package dependencies of Nautobot's, etc. This configuration setting allows a more targeted enablement of only warnings from within Nautobot itself, which can be useful when vetting various Nautobot Apps for future-proofness against upcoming changes to Nautobot.)


NAUTOBOT_ROOT

Default: ~/.nautobot/

The filesystem path to use to store Nautobot files (Jobs, uploaded images, Git repositories, etc.).

This setting is used internally in the core settings to provide default locations for features that require file storage, and the default location of the nautobot_config.py.

Warning

Do not override NAUTOBOT_ROOT in your nautobot_config.py. It will not work as expected. If you need to customize this setting, please always set the NAUTOBOT_ROOT environment variable.